Nexans YMvK Dca ULTIMO MOBIWAY 0.6/1 kV

MOBIWAY MOB

The MOBIWAY YMvK Dca is a MOBIWAY™ drum with the standard installation cable YMvK Dca This innovative new MOBIWAY™ Mob system is available for the most common types of YMvK Dca and YMz1K Cca. They are compatible with the ##link:MOBIWAY™ Mob systeem## of reusable flanges.

Main benefits

• Easy unwinding, even in difficult conditions like in aerial work platforms
• Thanks to integrated handles easy movable around the work site
• Connect several MOBIWAY MOB systems and install more cables at the same moment

Guide to use

• Place a MOBIWAY-MOB flange on the MOBIWAY drum and pull the socket down. 
• Lock the flange with the Super Locker. Do the same with the other side.
• Carry the system to the workplace - alone or with 2, depending on the weight.
• Set the reel down and combine with another MOBIWAY set if necessary.
• Simply unwind the cable(s)!

Is the drum empty? Unclip the MOBIWAY flanges and use them again on another MOBIWAY drum.

Key features of Nexans ULTIMO

• Faster stripping: up to 80% time savings thanks to the optimized sheath
• Improved safety: one cut and bend are enough – reducing the risk of injury or conductor damage
• UV-resistant: suitable for outdoor use, our ables passed the 720 hour test standard EN 50289-4-17 Method A
• With EPD Environmental Product Declaration: PEP EcoPassport provides full insight into the ecological footprint of the cables

Benefits for the installer

Nexans YMvK Dca ULTIMO on MOBIWAY Mob drums combines speed, ease of use and sustainability – exactly what you need on today’s jobsite. Ask for it at your wholesaler.

Cable Application

Nexans YMvK Dca ULTIMO 0.6/1 kV is a power cable  for general use in construction works subject to performance requirements on reaction to fire. YMvK Dca ULTIMO 0.6/1 kV is suitable for application in low voltage installations up to 0.6/1 kV, according to NEN 1010. It meets the requirements according to fire classification Dca-s2,d2,a3 for usage in buildings and civil engineering works with a medium fire hazard level (NEN 8012).

Design

1. Conductor: Bare copper, solid, class 1
2. Insulation: XLPE
3. Inner covering: filling compound 
4. Outer sheath: PVC
5. Colour: Grey

Installation

• In cable duct
• In cable tray
• In open air if protected from direct UV rays
• Embeded in concrete or cement or walls
• No ground laying without protection
• In industries