Over Nexans
Produkten & Oplossingen
Klantenservice
Werken bij Nexans
Nieuws - Pers
Applications
For use in railway vehicles (locomotives, trains, trolley busses), switching stations and control panels. Installation in cable ducts, tubes and outside (protected). Current carrying capacity acc. to EN 50343 as well as VDE 0298 part 4. Serves request acc. to EN 45545-1.
1. Conductor
Flexible stranded tinned copper, class 5 acc. to DIN VDE 0295 / IEC 60228 / HD 383
2. Insulation
Double layer insolation acc. to type EI110/EI109 (EM104) acc. to EN 50264-1, oil and diesel-oil resistant
3. Separator
Optional foil or tape
4. Screen
Tinned copper wire braid, acc. to EN 50264-1
5. Separator
6. Outer sheath
Special black cross-linked EVA, rubber type EM104 acc. to EN 50264-1, oil, diesel-oil, ozone and uv resistant. Colour black
e.g.: RHEYHALON VDE-Reg.Nr. 7967 (N)HXCSLOE-OZ EN 50264-3-2 300V 3x1,5 MM S FA-Nr. ...
(…OZ) – black cores with white numbers (…JZ) – black cores with white numbers and one green/yellow core
DIN 5510 part 1: Flame protection class 1, 2, 3 and 4; BS 6853 (on request)
Nominal voltage
Uo/U (Umax) = 300/500 (550) V
Max. operating voltage (d.c.)
Uo = 450 V DC
Testing a.c. voltage (5 minutes)
U = 2 kV
Conductor at normal operation
≤ 90 °C/250.000 h
≤ 120 °C/20.000 h
Overload
≤ 160 °C / 50 h
Conductor under short-circuit conditions (tinned)
≤ 200 °C
Other cross-sections on request.
Special conditions relating temperature and bending radii (e.g. by compelled guidance into cluthes, wagon transition and boogies) on request.
