English

Inloggen

Zoek in de catalogus

Neem contact met ons op

Over Nexans

Produkten & Oplossingen

Klantenservice

Werken bij Nexans

Nieuws - Pers

Kabels voor rollend materieel

LV Xlink polyolefin cables

MSZ HXOE

Silicone power cables

Rubber Power cables

Special cables

Home > > Onze produkten > Kabel voor speciale toepassingen > Kabels voor rollend materieel > LV Xlink polyolefin cables > MSZ HXOE

MSZ HXOE


	e-mail	printen	Neem contact met ons op

Cables for Rolling Stock

Karakteristieken

Zoeken op parameters

Informatie over verkoop/levering

Standaarden
Internationaal	EN 50264-1; EN 50267-2-1; EN 50267-2-2; EN 50268-2; EN 50305; EN 50306-2.1; EN 50343; EN 60684-2; IEC 61034-2

Beschrijving

Application
As control and connector cable in safety areas in railway rolling stock with circuit integrity
resistance and mineral oil and fuel resistance.

Marking
continuos printing in contrasting colors (manufacturer identification) + type identification t intervals of 500 mm resp. manufacturers identification thread

Core colours
up to 10 cores colored; core: 1- white, 2-brown, 3-blue, 4-black, 5-red, 6-yellow, 7-green, 8-grey, 9-orange, 10 violet; > 10 cores: all cores black with numbers

Standards
DIN 5510 part 1
Hazard level 1 - 4
EN 50200 15 min.
BS 6387 AXSZ

Design

Conductor/ core: tinned copper strands

Insulation: one layer of mica tape, over-lapped, halogen free flame retardent cross linked polymer

Stranding: several wires were stranded together in concentrical layers. Filling elements or pads out of halogen free, flame retardant material are allowed.

Wrapping: admissible layer, e.g. glass sheet or foil

Screening: tinned copper braid, optical coverage approx. 85%. If necessary a additional Aluminium luminated plastic foil is used.

Seperator: halogen free tape or foil overlapped admissible

Outer sheath: cross-linked, mineral oil and fuel resistant HFFR- Polyolefin compound

TOP

Karakteristieken
Constructie
Halogeenvrij	PE sheathed
Gebruik
Max. geleidertemperatuur, in gebruik	90°C
Corrosie dmv gassen	No acc. to EN 50267-2-2
Toxiciteit van gassen	innocuous EN 50305
Niet brand voortplantend ("mb")	EN 50305
Rookdichtheid	EN/IEC 61034-2

TOP

Zoeken op parameters

Aantal aders

Geleiderdoorsnede

mm²

Conductor diameter, range

mm

Dikte van de buitenmantel, minimum

mm

Cable Diameter, range

mm

Gewicht, benaderd

kg/km

Fire load

kWh/m

Uw keuze 37/37

Toon de volledige lijst

	Nexans ref.	Aantal aders	Geleiderdoorsnede (mm²)	Conductor diameter, range (mm)	Dikte van de buitenmantel, minimum (mm)	Cable Diameter, range (mm)	Gewicht, benaderd (kg/km)	Fire load (kWh/m)
	45985910	2	1	1,15 .. 1,3	0,42	5,3 .. 5,9	52	0,131
	45986410	14	1	1,15 .. 1,3	0,56	10,7 .. 11,5	225	0,477
	45986210	2	1,5	1,45 .. 1,65	0,42	6 .. 7	69	0,156
	45986710	7	1,5	1,45 .. 1,65	0,56	9,3 .. 10,3	187	0,358
	45988510	25	1,5	1,45 .. 1,65	1,1	17,4 .. 19	612	1,245
	41375510	5	1,5	1,45 .. 1,6	0,56	8 .. 8,6	131	0,238
	41395610	6	1,5	1,45 .. 1,6	0,56	8,7 .. 9,5	154	0,279
	41375710	7	1,5	1,45 .. 1,6	0,65	9,3 .. 10,3	187	0,238
	41375110	12	1,5	1,45 .. 1,6	0,7	11,3 .. 12,4	282	0,451
	41375910	25	1,5	1,45 .. 1,6	1,2	17,4 .. 19,2	612	1,245
	45987210	2	2,5	1,9 .. 2,05	0,56	7,4 .. 8,2	105	0,265
	45987810	8	2,5	1,9 .. 2,05	0,56	12,4 .. 13,4	310	0,61
	45988610	25	2,5	1,9 .. 2,05	1,1	20,5 .. 22,3	945	1,578
	41376310	3	2,5	1,9 .. 2,05	0,56	7,9 .. 8,5	131	0,252
	41376810	12	2,5	1,9 .. 2,05	0,85	14,3 .. 15,4	437	0,646
	41376910	25	2,5	1,9 .. 2,05	1,2	20,5 .. 22,3	914	1,578

Voeg toe aan favorieten

TOP

Technical Data

Properties		Requirements	Tests according to
Mechanical properties
max. tensile strength	during laying	50N/mm² conductor cross section
static tensile strength	fixed laying	15N/mm² conductor cross section
minimale admissible bending radii		geschirmt	ungeschirmt
fixed installation	at < 12mm Ø	4D	3D
	at > 12mm Ø	5D	4D
operation caused movement	at < 12mm Ø	8D	5D
	at > 12mm Ø	10D	6D
D= cable diameter
Thermal properties
Category temperature in operation resp. at laying:
at conductor	in operation	+90°C/100.000 h*
	in case of short circuit	+200°C
outer sheath surface	in operation	-40°C to +90°C
	at laying	-20°C to +50°C
* abgeleitet von der Arrhenius Kurve für 20.000 Std.
Electrical properties
Conductor resistance		EN 50306-2	EN 50305 Pt. 6.1
electrical strength	test voltage Ueff test duration 5 min.		EN 50305 Pt. 6.2
	core/core	2000 V AC
	core/screen	2000 V AC
Emergency running properties
insulation resistance		15 min.	EN 50200
circuit integrity		ASXZ	BS 6387

TOP

Informatie over verkoop/levering
All tests were arranged on representative samples.This cable is neither useful for multiple bending nor for torsion. If needed any single case must be decided.

Nexans © copyright 2001 - 2012

Legal Notice | Neem contact op | Site Map