Applications
For fixed installations on ships and offshore-units in all locations and open deck. The good screening qualities of the copper braid also reduce radio interferences and electrical influences to electronic installation.
The cables meet the fire characteristics acc. to IEC 60331-21 as well as the flame test requirement for bunched cables acc. to IEC 60332-3-22 and IEEE45-18.13. and perform to the SOLAS requirements.
All cable materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, these cables are especially suitable for the installation on passenger ships.
Design
- Conductor: Stranded bare copper class 2
- Insulation: fire barriers + HF HEPR (crosslinked hardgrade ethylene propylene rubber)
- Common covering: filler (extruded) or tape
- Armouring: separator tape (optional), bare copper braid, separator tape(optional)
- Outer sheath: Polyolefin,
Colour: orange
Marking
e.g.: l NEXANS l MGCH-F 1000 V 85 GRAD C DIN 89158, IEC 60092-353, IEC 60332-3 IEC 60331 HALOGENFREE 10 x 1,5 / 10,0 mm2 + Metric Marking
Core Identification
1 core: natural colour ( beige )
2 cores: black / blue
3 cores: black / blue / brown
4 cores: black / blue / brown / black
5 cores: black / blue / brown / black / black
7 to 24 core cable: all cores natural coloured, printed with numbers, starting in centre with number 1.
Cables with 3 cores and above also with green-yellow core (must be stated in order).
|
